Asset Tracker For Powered Equipment
Use the Asset Tracker Equipment (ATEQ) to keep up with all your essential machinery. Every time the equipment is powered on, the ATEQ automatically detects its location and allows you to view it on a high-resolution satellite map. When the equipment has been powered off for two hours, the ATEQ enters sleep mode to save power, which means that it only tracks the equipment if it moves outside a one-mile region.
The ATEQ is designed to withstand harsh environments. It's waterproof to 3.3 feet and can operate in temperatures between -22 and 140 degrees Fahrenheit. The device weighs only 5.6 ounces.
Monitors Engine Hours
Voltage & Low Battery Notification
Unauthorized Movement Alerts
Power Disconnect Alerts
The Asset Tracker For Equipment (ATEQ) requires a power source, from 8
- 30 VDC. Waterproof to 3.3 feet the ATEQ is built to withstand harsh environments.
Each time your equipment is powered on - the ATEQ will automatically perform
a position locate that you can view on a high resolution satellite map.
Once the ignition of your equipment has been powered off for approximately
2 hours, the ATEQ will perform a locate and enter sleep mode. Prior to
entering sleep mode, the ATEQ sets a one mile wide geo-fence perimeter.
If your asset is moved outside the one mile perimeter the unit will send
an alert and will track at 30 minute intervals. It will perform an auto
locate every 8 hours without power and every 24 hours with power. The ATEQ
can only be pinged (located on demand) when it is not in sleep mode. The
ATEQ wakes either via motion or ignition on.
Service Plans Available:
Monthly: $12.00 per month
Size: 4.87" L x 3.5" W x 1.25" H
Weight: 5.6 ounces
Operating Temperature: -22 to 140 degrees Fahrenheit
Storage: -40 to 167 degrees Fahrenheit
Wireless: GSM Quad Band
Network Coverage: Verizon Data Network
Input Voltage: +8 to +30 VDC
Power Consumption: 1 mA @ 13.8v in sleep mode
35 mA @ 13.8v when running, or when vibration sensed
550 mA @ 13.8v when transferring and receiving data