Flash Trac Asset Tracker
Use the Flash Trac Asset Tracker Equipment (ATEQ) for powered assets and trailers.
When connected to external power, the Flash ATEQ is configured to report its location every 10 minutes when moving, every hour when the ignition is off, all ignition on and off events, as well as motion based events. The flash ATEQ is also configured to report when low main external battery power drops below 11.75 vdc, as well as when it has been connected and/or disconnected from external power.
When disconnected from power, the Flash ATEQ will report both start and stop motion events. It will also report being in motion every 5 minutes if no external power is detected. Furthermore, the Flash Trac ATEQ will automatically report its position once every 24 hours when no external power is detected. If the internal battery has been fully charged (by being connected to a powered source for several hours), you can expect the Flash Trac to report its one time per day for approximately 3 months. Device will also report when internal battery gets low.
The ATEQ is designed to withstand harsh environments. It's waterproof to 3.3 feet and can operate in temperatures between -22 and 140 degrees Fahrenheit. The device weighs only 5.6 ounces.
Monitors Engine Hours
Voltage & Low Battery Notification
Power Disconnect Alerts
Service Plan Cost:
$12.00 per month
Size: 4.87" L x 3.5" W x 1.25" H
Weight: 5.6 ounces
Operating Temperature: -22 to 140 degrees Fahrenheit
Storage: -40 to 167 degrees Fahrenheit
Wireless: GSM Quad Band
Network Coverage: Verizon Data Network
Input Voltage: +8 to +30 VDC
Power Consumption: 1 mA @ 13.8v in sleep mode
35 mA @ 13.8v when running, or when vibration sensed
550 mA @ 13.8v when transferring and receiving data
Download The Flash ATEQ Spec Sheet (PDF)
Get Free FedEx Ground Shipping When You Order Today!
Offer Limited To The Continental U.S.
Have A Question About "Flash Trac Asset Tracker Equipment" ?
people found this helpful. Was this helpful to you?
) | No